How to Drywall an Arch
Learning how to drywall an arch might be easier than you think
Beginners are often apprehensive about the curved surface of drywall. It’s completely understandable. If you really think you’ll have trouble, you can always install the arch yourself and hire someone to do the drywall for you. But before you make your decision, have a look over this handy, step-by-step guide. You may find that learning how to drywall an arch is easier than you think.
The Easy Way To Drywall An Arch
So you’ve finished framing your arch and now want to embark on the finishing stages, well we’re here to help. Follow the instructions below and you’ll be ready to paint in no time!
1. Use drywall that is 1/2 inch thick and fasten it over the arch. Oh, no! Now, your beautiful curves are covered. Time for step two.
2. Cut drywall to archway. It’s time to get your curve back. Use a router with a special bit to cut drywall to make a clean cut along the edge of your arch. (Tip: Google rotozip)
3. Add more screws along the edge of the curve as needed. This will secure the drywall to the MDF and give you a cleaner edge. You’ll definitely need to add some, but how many is up to you and your curve. While learning how to drywall an arch, you’ll be able to see whether you need more screws or not. If it looks like there are open spaces or gaps, add another screw.
4. Repeat on the other side. Just switch sides and follow steps one through three again. When you’re done, both sides of the archway should have drywall.
5. Measure and place a double layer of ¼” drywall under the archway. Here’s a tip: Wet the back of the drywall to help it bend to conform to the curve. Before fastening, slowly work it with your fingers gently creating a curve. Be careful not to break the drywall. Don’t worry if you have to start over as it will take a little bit of time to acquire the feel for bending drywall.
6. Screw the drywall into place. You’re already holding the drywall in place at this point, so just use your drill and screw bit to screw it into place.
7. Now, you’re ready for tape and mud. This is the part where it really helps to be meticulous. Apply very thin layers of mud and then sand them down until your surface is smooth. Don’t forget to leave time for each layer to dry in-between. Taping and compounding is a practice in patience, but it will pay off in the end. You could know everything about how to drywall an arch, but if you don’t have patience with this process, you will not get the perfect finish you were looking for.
See, we told you putting drywall on an arch wasn’t that hard! But if you really want to see how easy it is, check out the video of the below of the entire process.
How to Drywall An Arch Video
What To Do After You Drywall The Arch
Now that your archway is installed and drywalled, you’re ready to paint. But before you get out the paintbrushes, take a step back and admire your work. You just installed a professional-quality arch in almost no time at all, and then finished it despite the fact that you were worried about knowing how you would drywall an arch. It’s done and looking fabulous. Time for a little pat on the back. You’ve earned it.
Archways & Ceilings — Your Source For Archway Kits
Our objective is to make it easy for you to get the archway you want while getting it installed and painted with as little fuss as possible. We can design an archway built to your measurements, style, and that’ll fit the space you choose. We love seeing your ideas materialize and can’t wait to see your next archway! If you’ve got a project in process, or one already completed, don’t forget to tag us on Instagram at @archwaysandceilings or use the hashtag #archwaysandceilings.
We look forward to working with you, and if you have any questions, please don’t hesitate to reach out to us. We’re always here to help.
This article originally appeared on The Curve Appeal Blog at https://www.archwaysandceilings.com/blogs/curve-appeal-blog/drywall-arch